The speed of this printer quickly spelled out that is about 7 ipm for mono and the 4.8 ipm for color and for 4R-sized photo takes 55 seconds.

Resolution of Canon PIXMA iP2770 printer at 4800 x 1200dpi (max).

Still uses USB 2.0 connectivity and the type cartridge using PG-810, CL-811 (PG-810XL, CL811XL Optional).

For this printer weight of 3.4 kg with dimensions of 445 X 250 X 130mm.

If a lights blink on the POWER and RESUME button alternately and it will show an error 5B00.

It means that your ink absorber inside the printer is almost full.

In order to solve this you need to clear or reset the counter protection of your printer.

First make sure that the power cable and usb cable are connected, before you perform the reset procedure.

Turn off the printer without pulling the power cords.

Hold down Resume button and press Power button.

Keep holding down Power button and let Resume button go.

Then Press Resume button 5 times then let BOTH buttons go.

You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Resetter Canon Ip2770 Download The Resetter

After you download the resetter, extract it and double click servicetool.exe 2.

Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.

This is a new Service Tool Please leave a comment, if its working Download.